Thanks for purchasing PLANET WGSW-48040HP Layer 2+ 48-Port 10/100/1000Mbps 802.3at PoE Managed Switch.
This document provides the firmware release note and history of the below products:

Version 1.340b140408 Released at 2014/4/8
=======================================
Firmware version: v1.340b140408
Hardware version: 1.0
File Name: FW-WGSW-48040HP_V1.340b140408.dat
File Size: 4,276,805 bytes 
Release at 2014/04/08
=======================================
Function enhance

This firmware provides the following modification:

A: Bug Fixed -
   (1) Fix PoE chip 2/3/4 Reserved function.   
   
B. Function Added -
    (1) Improved PoE Function   

C. Other:
    (1) Enhanced System stability

D. Known Issue:
    NA.



[Upgrade Requirements]:

1. The latest firmware version of WGSW-48040HP
2. The WGSW-48040HP PoE Switch
3. Workstation with Microsoft IE 7.0 or above.
4. TFTP server.


[Upgrade procedure]:

1. Connect the RJ-45 UTP cable to the target Switch.

2. Login is required to access the WEB interface after the Switch boot completes successfully. The factory default user name and password is "admin".

3. After Web main screen appeared, click the "System"\"TFTP Firmware Upgrade" at the left Menu.  

4. The screen will be direct to the "TFTP Firmware Upgrade" page, enter values as below.
   a. Enter TFTP IP address.
   b. Firmware File Name: please enter firmware file name, like as "FW-WGSW-48040HP_V1.340b140408.dat"

5. Click "Upgrade" button to start the firmware upgrade procedure. 

6. The system would pop up the confirm message, Click ˇ§OKˇ¨, the Switch will start the TFTP upgrade procedure.

7. Please don't power off the Switch while procedure be started.

8. Please check your TFTP server application to confirm the TFTP file is well transmit to the Switch.

9. The Switch will reboot then, and It will cost 2 to 3 minutes for the TFTP firmware upgrade and reboot procedure. 
   Please wait for the process complete.

10. Once the new software is loaded to the system successfully, the Login screen appears. 

11. Enter the user name and password to login the Switch.

12. Relogin the Switch via WEB browser. Please click the "System \ "System Information" to double check if the firmware be upgraded successfully.

 

*********************************
Firmware Release History:  
*********************************

Version 1.340b140217 Released at 2014/2/22
=======================================
Firmware version: v1.340b140217
Hardware version: 1.0
File Name: FW-WGSW48040HP_1.340b140217.dat
File Size: xxxxKB 
Release at 2014/2/22
=======================================

Initial Release

Sincerely yours,
PLANET Technical Support Team
Http://www.planet.com.tw


