| Specificații hardware |
| Porturile de cupru |
5 x 10/100/1000BASET RJ45 TP auto-MDI/MDI-X, auto negotiation |
| Conector |
Removable 6-pin terminal block
Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2 |
| Alarma |
Provides one relay output for power failure
Alarm relay current carry ability: 1A@DC 24V |
| LED |
3 x LED for system and power:
■ Green: DC Power 1
■ Green: DC Power 2
■ Red: Power Fault
2 x LED for each copper port
■ Green: 1000Mbps LNK/ACT
■ Orange:10/100Mbps LNK/ACT |
| Protecția ESD |
6KV |
| Protecția EFT |
6KV |
| Cerinte de putere |
12~48V DC, redundant power with polarity reverse protection function, 24V AC power support |
| Consum de energie / dizolvare |
3.6 watts/12.35BTU |
| Instalare |
DIN-rail kit and wall-mount ear |
| împrejmuire |
IP30 metal case |
| Dimensiuni (L x Î x H) |
70 x 104 x 30 mm |
| Greutate |
252g |
| Comutare Specificații |
| Schema de procesare a comutatorului |
Store-and-Forward |
| Tabel de adrese |
4K entries |
| Memorie tampon |
1M bits on-chip buffer memory |
| Controlul debitului |
Back pressure for half duplex
IEEE 802.3x pause frame for full duplex |
| Comutatorul Fabric |
10Gbps |
| Capacitatea de transfer (pachet pe secundă) |
7.4Mpps@64bytes |
| Jumbo Frame |
9K |
| Cabluri de rețea |
10/100/1000BASE-T
Cat. 3, 4, 5, 5e, 6 UTP cable (max. 100 meters)
EIA/TIA-568 100-ohm STP (max. 100 meters) |
| Conformitatea standardelor |
| Respectarea standardelor |
IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3x Full-Duplex Flow Control
IEEE 802.3az Energy Efficient Ethernet
IEEE 802.1p Class of Service |
| Respectarea reglementărilor |
FCC Part 15 Class A, CE |
| Testul de stabilitate |
IEC 60068-2-32 (free fall)
IEC 60068-2-27 (shock)
IEC 60068-2-6 (vibration) |
| Mediu inconjurator |
| Temperatura |
Operating: -40~75 degrees C
Storage: -40~75 degrees C |
| Umiditate |
Operating: 5~90%, Storage: 5~90% (non-condensing) |