Quick and easy test on RJ-45 outlet for Power over Ethernet existence in a second
PLANET POE-TESTER is an easy-to-use PoE diagnostic adapter for network installers, company MIS and even home users to quickly identify the existence of Power over Ethernet on applications network. It is designed to detect if the IEEE 802.3af/at PoE voltage runs over the UTP cable and identify the type of PSE (Power Source Equipment) for troubleshooting.
Plug and Show LED Indicators
Simply connect the POE-TESTER to the PSE or the RJ-45 outlet and the LED will light up when it detects the PoE voltage via the UTP cable and identifies the PSE to be mid-span, end-span, or even the latest 4-pair 60-watt ultra PoE in a second. |
| |
| |
| |
|
| |
| |
| |
Identify PoE PSE Modes
The POE-TESTER provides two LEDs for quick and easy PSE mode identification. A Power over Ethernet system comprises a PSE (Power Sourcing Equipment) and a PD (Powered Device). The PSE is a device that will provide power in a PoE setup. There are two types of PSE, Mode A and Mode B. The PSE may either be a Mode A, end-span PoE switch or a Mode B, mid-span PoE injector.
| | Mode A / End-span | | | Mode B / Mid-span | | |
| With compact size and configure free design, the POE-TESTER is truly the best handy PoE test tool for the installation of PD device to test if IEEE 802.3af/at PoE power is sent to wireless access points, IP surveillance cameras, VoIP phones and other PoE devices. It offers plug-and-play PoE diagnostic and PoE installation for installers and system integrators. | | | | | | | | | |
- Quickly tests RJ-45 outlet for Power over Ethernet existence
- Two LEDs indicate the types of PSE (power source equipment)
- - End-span PoE switch
- - Mid-span PoE injector / injector hub
- - 4-pair, 60-watt ultra PoE injector
- Compliant with IEEE 802.3at/af Po E standard
- Compact size, Plug and Play design
| | |
| Hardware Specifications |
| Interface |
1 x RJ-45 TP connectors
■ PoE Power Input (PD)
|
| LED indicators |
End-span / Pin 1236 (Green)
■ The PoE voltage is detected on pair 1,2,3,6
Mid-span / Pin 4578 (Orange)
■ The PoE voltage is detected on pair 4,5,7,8 |
| Power input |
IEEE 802.3at/af compliant with voltage within 40~57V |
| Dimensions (W x D x H) |
23 x 70.1 x 22 mm |
| Weight |
20g |
| Cabling |
UTP: Cat. 5 UTP cable or above, 100m maximum |
| Environments |
| Temperature |
-10 ~ 60 degrees C (operating) |
| Humidity |
5 ~ 95% (non-condensing) |
| Standards Compliance |
| Standard |
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus |
| Emission |
CE Compliance |
Datasheet
| Date |
Version |
Description |
Download |
| 2013-07-12 |
1.0 |
POE-TESTER
|
 |
Quick Guide
| Date |
Version |
Description |
Download |
| 2013-07-12 |
1.0 |
Initial release.
|
|
EC Declaration
| Date |
Version |
Description |
Download |
| 2013-10-16 |
1.0 |
EC Declaration
|
| | |
