- Overview
- Application
- Key Features
- Specification
- Download
- Related Products
High Performance Gigabit Ethernet over Phone Wire Solution
PLANET VC-234G, a new-generation and high-performance Gigabit Ethernet-over-VDSL2 Converter, works well with a pervasive telephone line network with a symmetric (downstream/upstream) data rate of up to 190/190Mbps (G.INP, Sym, 8dB) over a distance of 300m and 20/12Mbps over a long distance of 1.4km. It is based on the two-core networking technology, Gigabit Ethernet and VDSL2 (Very-high-data-rate Digital Subscriber Line 2). The VDSL2 technology offers absolutely the fastest data transmission speed over the existing copper telephone lines without the need of rewiring.
With integrated support for the ITU-T’s new G.993.5 vectoring technology, the VC-234G works in conjunction with vectoring-enabled DSLAMs to remove crosstalk interference and improve maximum line bandwidth across the existing copper telephone infrastructure. | | | | | | | Implementing with Existing Telephone Copper Wires
The VC-234G is also a Long Reach Ethernet (LRE) Bridge providing four RJ45 Ethernet ports and two RJ11 phone jacks, in which one is for VDSL connection and the other one is for POTS (Plain Old Telephone Service) connection. The VC-234G has a built-in POTS splitter to share the existing phone line with POTS; therefore, there is no need to replace the existing copper wiring. Just plug the VC-234G into the existing RJ11 telephone jack and a high-performance VDSL2 network can be connected. The VC-234G is ideal to be used as an Ethernet extender to an existing Ethernet network. | | | | | | | Delivering High-demand Service Connectivity for ISP/Triple Play Devices
The VC-234G provides excellent bandwidth to satisfy the triple play devices for home entertainment and communication. With the capability of 240/120Mbps (G.INP, Asym, 8dB) asymmetric data transmission, the VC-234G enables many multi-media services to work on the local Internet, such as VoD (video on demand), voice over IP, video phone, IPTV, Internet caching server, distance education, and so on. | | | | | | | Easy and Flexible Installation
The Ethernet-over-VDSL2 Converter comes with a Plug-and-Play design and is fully compatible with all kinds of network protocols. Moreover, the operating status of each individual port and the whole system can be watched via the rich diagnostic LEDs on the front panel. The VC-234G offers two modes, CPE and CO, for application -- CPE mode is used at client side and CO mode is at central side. The CPE or CO mode can be adjusted by using a built-in DIP switch. For the point-to-point connection, a CPE mode and a CO mode must be set up as one pair of converters to perform the connection. | | | | | | | ADSL2+ Fallback
For those ISPs that still provide ADSL broadband service, the VC-234G can support a downstream rate of up to 24Mbps and an upstream rate of 1Mbps with the ADSL2+ technology. The VC-234G can also be directly switched over to VDSL2 after the network upgrade. | | | | | | |
Ethernet Distance Extension
Two VC-234G devices, acting as a standalone pair, are good for Ethernet distance extension over the existing telephone wires. With just one pair of AWG-24 copper wires, you can easily connect two Ethernet networks together with a maximum data rate of 100Mbps. The telephone service can still be used while the VC-234G CO/CPE is in operation. The two solutions listed below are typical applications for the Ethernet over VDSL2 Bridge. | | | | | | | | | | | | | | MTU/MDU/Hospitality Solution
The VC-234G is a perfect solution to quickly providing cost-effective yet high-speed network services to multi-unit buildings such as residential buildings (multi-dwelling units), commercial (multi-tenant units) buildings, hotels and hospitals. By utilizing the existing telephony infrastructure, network installation is straightforward and requires no new wiring. With up to 240/120Mbps (G.INP, Asym, 8dB) transmission, VoD, IP telephony and various broadband services can be easily provided. | | | | | | | | | | | | | | Last Mile of FTTx Deployment
The VC-234G is an ideal solution for FTTx (Fiber to the Building, Fiber to the Campus or Fiber to the Node) applications. It supports high-bandwidth VDSL2 over the existing telephone wires in the “last mile” from the telecom or Internet service provider’s fiber node to the buildings and customers’ apartments. The 10/100/1000Mbps port of the VC-234G can be directly connected to a PC or Ethernet devices such as Ethernet switches or broadband routers. It is excellent for phone line network built under Internet because every room or house can use the existing phone line to transmit data through the Internet and the whole building can share the Internet to the wider area network at a minimum cost. | | |
- ITU-T G.993.5 G.Vector and G.INP
- DMT-based coding technology
- Built-in POST splitter to share voice and date
- One RJ11 connector for VDSL port with VDSL connection
- One phone connector for telephone connection
- Voice and data communication can be shared simultaneously based on the existing telephone wire
- CO/CPE mode selectable via DIP switch
- Selectable target band plan and SNR margin
- Up to 240/120Mbps (G.INP, Asym, 8dB) bandwidth
- 4 10/100/1000BASE-TX LAN ports
- Complies with IEEE 802.3, 10BASE-T, IEEE 802.3u, 100BASE-TX and IEEE 802.3x, flow control Ethernet standards
- Half duplex back pressure and IEEE 802.3x full duplex pause frame flow control
- Supports a packet size of up to 9K bytes and IEEE 802.1Q VLAN tag transparency
- VDSL2 stand-alone transceiver for simple bridge modem application
- Advantage of minimum installation time (Simply Plug-and-Play)
- Supports extensive LED indicators for network diagnosis
- Compact in size and easy to install
| | |
| Hardware Specifications |
| LAN Ports |
4 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports |
| VDSL Port |
1 VDSL2 RJ11 female phone jack
Twisted-pair telephone wires (AWG24 or better) up to 1.4km
|
| Phone Port |
1 RJ11, built-in splitter for POTS connection |
| Dimensions (W x D x H) |
154.6 x 86.0 x 26.3 mm |
| Weight |
350g |
| Power Requirements |
5V DC, 2A external power |
| LED Indicators |
1 power: Green
4 1000BASE-T LNK/ACT: Green
4 100BASE-TX LNK/ACK: Green
1 VDSL: Green
1 CO: Green
1 CPE: Green |
| Housing |
Metal |
| DIP Switch & Functionality |
4-position DIP switch
CO/CPE mode select
Selectable G.INP and interleaved mode
Selectable target Band plan
Selectable target SNR mode
|
| Switch Specifications |
| Switch Processing Scheme |
Store-and-Forward |
| Address Table |
2K entries |
| Flow Control |
Back pressure for half duplex
IEEE 802.3x pause frame for full duplex
|
| Jumbo Packet Size |
9K bytes |
| System Specifications |
| VDSL Compliance |
VDSL-DMT
ITU-T G.993.1 VDSL
ITU-T G.997.1
ITU-T G.993.2 VDSL2 (Profile 17a/30a Support)
ITU-T G.993.5 G.vectoring
ITU-T G.998
G.INP
|
| ADSL Compliance |
Capable of ADSL2/2+ standard
ITU G.992.3 G.dmt.bis
ITU G.992.5 G.dmt.bisplus
Data Rate: Up to 24Mbps |
Performance*
(Downstream/Upstream) |
Interleave, Asym, 8dB
200M -> 237.80Mb/119.17Mb
400M -> 175.31Mb/82.57Mb
600M -> 119.17Mb47.87Mb
800M -> 67.74Mb/23.24Mb
1000M -> 54.22Mb/8.59Mb
1400M -> 31.21Mb/5.59Mb
Interleave, Sym, 8dB
200M -> 182.73Mb/180.89Mb
400M -> 146.28Mb/113.39Mb
600M -> 89.53Mb/69.68Mb
800M -> 54.24Mb/38.86Mb
1000M -> 29.13Mb/28.12Mb
1400M -> 25.17Mb/11.49Mb
G.INP, Asym, 8dB
200M -> 248.18Mb/127.65Mb
400M -> 85.71Mb/82.43Mb
600M -> 119.28Mb/49.11Mb
800M -> 69.94Mb/23.96Mb
1000M -> 62.56Mb/9.24Mb
1400M -> 34.74Mb/5.75Mb
G.INP, Sym, 8dB
200M -> 192.32Mb/190.25Mb
400M -> 152.38Mb/117.50Mb
600M -> 92.92Mb/71.62Mb
800M -> 53.92Mb/39.59Mb
1000M -> 32.32Mb/31.33Mb
1400M -> 28.03Mb/12.53Mb
Interleave, Asym, 12dB
200M -> 215.97Mb/109.71Mb
400M -> 149.37Mb/69.88Mb
600M -> 94.94Mb/41.30Mb
800M -> 60.76Mb/14.03Mb
1000M -> 45.97Mb/6.84Mb
1400M -> 27.15Mb/3.76Mb
Interleave, Sym, 12dB
200M -> 169.27Mb/165.32Mb
400M -> 129.22Mb/94.79Mb
600M -> 76.86Mb/61.35Mb
800M -> 43.57Mb/33.04Mb
1000M -> 22.57Mb/25.94Mb
1400M -> 21.03Mb/9.37Mb
G.INP, Asym, 12dB
200M -> 225.37Mb/116.22Mb
400M -> 154.85Mb/72.01Mb
600M -> 98.01Mb/42.32Mb
800M -> 62.55Mb/13.81Mb
1000M -> 51.51Mb/7.21Mb
1400M -> 30.66Mb/3.54Mb
G.INP, Sym, 12dB
200M -> 177.01Mb/171.92Mb
400M -> 133.47Mb/97.78Mb
600M -> 79.41Mb/57.73Mb
800M -> 46.55Mb/33.64Mb
1000M -> 28.71Mb/25.01Mb
1400M -> 23.31Mb/10.29Mb |
| Standards Conformance |
| Standards Compliance |
IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3x Full-duplex flow control
IEEE 802.1p Class of Service
ITU-T G.993.1 VDSL
ITU-T G.997.1
ITU-T G.993.2 VDSL2 (Profile 17a/30a support)
ITU-T G.993.5 G.Vectoring & G.INP
ITU-T G.998 |
User's Manual
| Date |
Version |
Description |
Download |
| 2017-06-15 |
1.0 |
Initial release.
|
 | |
| Photo |
Model |
Description |
 |
IDL-2402 |
24-Port ADSL2/2+ IP DSLAM |
 |
IDL-4802 Series |
48-Port ADSL 2/2+ IP DSLAM |
 |
VC-231 |
Ethernet over VDSL2 Converter (Profile 30a) |
 |
VC-231G |
1-Port 10/100/1000T Ethernet to VDSL2 Converter -30a profile w/ G.vectoring, RJ11 |
 |
VC-234 |
4-Port Ethernet over VDSL2 Bridge (Profile 30a) |
 |
VC-820M |
8-Port VDSL2 + 2G TP/SFP Managed Switch |
 |
VDL-2420M |
24-Port VDSL2 IP DSLAM + 2-Port Gigabit TP/SFP Combo |
|
